Hebei Juliang Technology Co., Ltd. is one of the leading manufacturers and suppliers of multi-functional laser tube cutting machine in China. Please feel free to buy CE approved machinery made in China here from our factory. All customized machines are with high quality and competitive price.

Stop Buying Machines for Every Tube Shape

One Cutter. Round. Square. Hexagonal. D-Shaped. All of It.
Look at your pipe rack. Round tubes in one bay. Square tubes in another. Hexagonal or D-shaped profiles stacked in the corner, waiting for a different machine.
Most shops handle three different tube shapes with three different tools. Or worse - a cold saw and hours of grinding.
The fix: A multi-functional laser tube cutting machine that cuts every hollow section you throw at it. Mild steel, stainless steel, aluminum. Round, square, rectangular, waist-shaped, hexagonal, D-shaped, irregular.
Swap profiles in ten minutes. No second machine. No tool change.

The One Number That Saves You 18% on Material

Before we get to specs, here's what a customer in Thailand discovered:

"We used to waste 18% of our square tube inventory because the cold saw couldn't cut accurate intersecting profiles. The laser now nests the same parts with almost no scrap."

That 18% material saving alone paid for the machine's automatic feeder in seven months.

Now, the specs that deliver that saving:

What You Cut	Size Range
Round tubes	φ12 – φ220 mm
Square/rectangular tubes	□12 – □150 mm
Waist-shaped / hexagonal / D-shaped	Any hollow section
Positioning accuracy	±0.03 mm
Repeatability	±0.03 mm
B-axis max speed	120 RPM
Max tube weight (manual load)	120 kg

Full-meter accuracy: 0.15 mm deviation over 6 meters. Your long parts stay true from end to end.

How a Thai Fabricator Cut Waste and Doubled Speed

The customer: Structural steel shop, Thailand

The problem: Square and round tubes on an old cold saw + drill. Each intersecting joint needed drilling after cutting - two steps. Labor cost was eating margin. Material waste ran 18%.

The solution: One multi-functional laser tube cutting machine with automatic feeding

After three months:

Cutting speed: tripled

Post-processing: zero - the laser cuts the cope profile in one pass

Material waste: 18% → near zero

Operator: now runs two machines instead of one

They ordered a second unit in month four.

What he told us: "I don't care if a machine looks expensive on paper. I care if it cuts my waste and my labor. This one does both."

Three Ways This Machine Pays for Itself

Payback #1: Fewer Machines to Buy
You don't need a round-tube cutter, a square-tube cutter, and a separate notcher. One multi-functional laser tube cutting machine replaces all three. That's capital you keep in your bank account.
Payback #2: Less Material in the Scrap Bin
A cold saw doesn't nest. The laser does. FLCAME nesting software arranges your parts tightly on the tube. A Philippine furniture maker cut his aluminum square tube waste from 22% to 6% in the first month.
Payback #3: Faster Quotes for Complex Parts
When a customer asks for a handrail with 30 intersecting joints, you don't have to guess how many hours of drilling and fitting. You quote confidently because the laser cuts every joint perfectly. One Australian shop won three contracts in two months because their lead time was half the competitor's.

The Chuck System That Handles Every Shape

Most tube cutters use a simple clamp. Heavy tube? It slips. Long tube? It sags. Square tube? The clamp crushes the corners.
This machine uses a pneumatic chuck with shaped jaws:
Round jaws for round tubes
Square jaws for square/rectangular tubes
Soft jaws for delicate aluminum or thin wall
Gear change in ten minutes - One set of chuck jaws covers φ12–φ118 and φ116–φ222. Switch from small round tubes to large square sections without hunting for tools.
The follow-up support travels with the material. A 120 kg, 6-meter pipe won't sag or slip.

Where Real Shops Use This Machine

Industry	Actual Application
Steel structure	Handrail posts, pipe trusses - intersecting cuts come out ready to weld
Furniture	Chair frames, table legs - consistent lengths across hundreds of pieces
Automotive	Roll bars, seat frames - ±0.03 mm means weld gaps stay consistent
Fitness equipment	Gym frames, handlebars - D-shaped tube cuts perfectly with the same chuck

One customer runs this multi-functional laser tube cutting machine inside a shipping container workshop. He cuts square tubes for trailer frames in the morning and round pipes for handrails in the afternoon. Same machine. No changeover headache.

Who Stands Behind It - Hebei Juliang Technology

We started in 2014. Three factory expansions later, we hold invention patents, utility model patents, and CE certification. Government-listed as a high-tech enterprise.
We cut our own steel every day on our own floor. That experience goes into every machine we ship.

Service That Answers the Phone

Free sample cut - Send a DXF. We run it and video the result. No charge.
24/7 remote video support - Real engineers, no ticket system
1-year warranty (whole machine), 2-year warranty (laser generator)
Spare parts - Within 48 hours after fault confirmation
Return-to-factory repair - Free under warranty

FAQ

Q: How long to change from round to square tubes?

A: About ten minutes. One set of chuck jaws covers both. Your operator doesn't need special tools or a second person.

Q: Can I run automatic and manual loading on the same machine?

A: Yes. Switch in the control panel. Automatic for long production runs. Manual for short batches or odd-length offcuts. The machine remembers settings for each mode.

Q: What if the follow-up support drifts out of alignment?

A: It's mechanically coupled to the chuck - it doesn't drift independently. If recalibration is ever needed, we provide a video walkthrough. Most customers fix it in under 15 minutes.