Hebei Juliang Technology Co., Ltd. is one of the leading manufacturers and suppliers of industrial cnc portable cutter in China. Please feel free to buy CE approved machinery made in China here from our factory. All customized machines are with high quality and competitive price.

So What Is This Thing, Really?

Think of it as a CNC cutting system that doesn't anchor you to one spot. Most shops have that one massive cutting table that eats up floor space and forces you to haul every piece of metal across the workshop. This unit flips that setup entirely. It's a movable laser cutter that goes to the material, not the other way around. You can roll it out for a job, make your cuts, and tuck it away when you're done. The air-cooled 1200W source means you're not messing with water chillers or coolant top-ups. Just power it up, dial in your material settings, and start cutting. For mild steel up to 10mm, stainless to 8mm, and aluminum to 6mm, it delivers clean, repeatable results.

Let's be honest about what this machine is and isn't. It won't replace a 6kW industrial gantry if you're processing 25mm plate all day. But if your work involves moving between job sites, or if your workshop is tight on floor space, this cutter solves problems that stationary systems can't touch.

The frame itself is built differently than most portables. A lot of manufacturers bolt together rail sections, which gives you alignment issues over time. We weld the main structure as a single unit, put it through stress relief, and then machine the rail mounting surfaces after the stress relief process. That extra step means the machine doesn't slowly twist itself out of calibration after you've moved it around a few dozen times. It holds accuracy within ±0.1mm over time, not just out of the crate.

Material selection for the rails matters here too. We use hardened steel guide rails with a surface hardness rating that resists wear from the ball bearing carriages. Cheaper units use soft rails that develop flat spots after a few hundred hours of use, which shows up as inconsistent cuts. Ours hold up to continuous production without that degradation.

What About the Laser Source Itself?

The 1200W air-cooled source is the heart of this system. Here's the practical breakdown of what that means for you:

No water cooling loop – No coolant to change, no pump to maintain, no anti-freeze required if your shop drops below freezing.

Warm-up time – You're cutting within a couple of minutes, not waiting for a chiller to stabilize.

Maintenance interval – The source is rated for 20,000 hours of operation before you need to think about servicing it.

Power draw – It runs on standard 220V single-phase, so you don't need a three-phase connection or a transformer.

The air-cooled design does have its limits. If you're cutting at maximum power continuously for hours on end, the source will throttle output slightly to protect itself. We've seen this in extended production runs – the machine maintains cut quality but automatically reduces duty cycle. For typical workshop use where you're setting up parts, marking, and cutting intermittently, you won't hit this limit.

When This Machine Isn't the Right Fit

I don't want to oversell this. There are situations where a portable unit isn't the answer.

If you're cutting 25mm plate every day, you need a high-power CO₂ or fiber system with a water chiller and a robust beam path. This portable cutter will struggle to get through thick material, and the air-cooled source will throttle back before it finishes.

If your production involves processing full 4x8 sheets continuously, a gantry system with a pallet table is faster. This machine can handle sheets, but you have to move the sheet manually between cuts, whereas a fixed table with a pallet lets you load while the machine cuts.

If you're cutting a lot of galvanized or stainless over 8mm, consider a more powerful system. The thickness limits exist for a reason – you can push them a bit, but quality drops off quickly.

Production Process at Our Factory

Every machine we build follows this sequence:

Raw Material – Steel sections and plate arrive with mill certificates.

Frame Welding – All structural welds are done by certified fabricators using jigs to maintain geometry.

Stress Relief – The welded frame goes into an oven for thermal processing. This stabilizes the structure so it doesn't warp over time.

Machining – Rail mounting surfaces and reference edges are ground to specification.

Sub-Assembly – Rack, pinion, servo drives, and guide rails are installed.

System Testing – The completed assembly runs for 24 hours cutting 6mm mild steel, with accuracy checks at intervals.

Cleaning & Packing – The unit is wiped down, packed with desiccant, and crated for shipment.

Our advantage

Choose the plan that suits you best.

Compact integrated frame – The gantry is built as a single welded structure. That means it stays rigid on the job site and doesn't lose calibration like bolt-together designs. You can move it regularly without worrying about alignment shifting.

High cutting precision – ±0.1mm accuracy is the spec, but in practice users report even tighter tolerances on thinner materials. This means parts fit without rework, which saves time and material

Low maintenance cost – The air-cooled source eliminates coolant-related maintenance. Consumables are limited to nozzles and lenses – both affordable and easy to change

Energy-saving laser source – The 1200W source draws less power than comparable systems. Over a year of regular use, the power savings cover a significant portion of the machine's operating cost..

Stable servo transmission – Servo motors maintain position without losing steps. You don't get rounded corners or misaligned hole patterns that you might see with stepper-based systems.

Easy installation – Set up in half a day with basic hand tools. The control box runs on 220V – no special electrical work required.

Small footprint – When it's not in use, the cutter occupies about the same floor space as a large toolbox. For shops where every square foot is valuable, that's a genuine advantage

Continuous production – The air-cooled source runs for extended periods without derating. You can run a full shift and get consistent results from the first part to the last.

Frequently Asked Questions

What types of metal can this machine cut, and how thick?
Mild steel up to 10mm, stainless up to 8mm, and aluminum up to 6mm are the rated capacities. In practice, you can push these slightly with adjusted speeds, but cut quality starts to drop beyond these thicknesses. Different alloys within each category behave differently – a high-carbon steel cuts differently from low-carbon material.

How long does it take to set this up after delivery?
Plan on half a day with two people. The unpacking, rail mounting, control box connection, and software setup take about 3–4 hours. Add another hour for calibration cuts. Most users are making production parts by the end of their first day with the machine.

What's the difference between this portable cutter and a fixed gantry machine?
Fixed gantry systems are faster for high-volume production and handle thicker material. This portable unit is for when you need mobility – moving between job sites, or working in shops where floor space is limited. If you do high-volume sheet processing on 4x8 sheets all day, get a fixed system. If your work is varied and you need to move, this is the better choice.

Does Juliang provide training and support?
Yes. We offer remote video support from our engineers, which covers most installation questions. For customers who prefer on-site training, we can arrange that as well. Our support starts at purchase, not at failure – we've found that answering setup questions early prevents most service issues later.

What's covered under warranty?
The complete machine has a 1-year warranty, and the laser source is covered for 2 years. This covers manufacturing defects and premature component failure. Consumables – nozzles, lenses, ceramic rings – are not covered beyond the initial supply. We stock spare parts and can ship replacements quickly to minimize your downtime.

14 -