Hebei Juliang Technology Co., Ltd. is one of the leading manufacturers and suppliers of cnc portable metal cutting machine in China. Please feel free to buy CE approved machinery made in China here from our factory. All customized machines are with high quality and competitive price.

A Mobile Cutting Station That Actually Cuts Production Parts

If you've ever struggled to move a 200-pound steel plate around your workshop just for some cuts, you'll understand the purpose of this machine. It's a portable, CNC-controlled metal cutting system designed to come to your workpiece. Its 1200W air-cooled laser can achieve clean cuts in 10mm mild steel, 8mm stainless steel, and 6mm aluminum. The entire system operates on standard 220V single-phase power, meaning no need for water cooling, three-phase conversion, or costly coolants. It's a straightforward solution: arrive, cut, and proceed.

Portable cutting equipment gets a bad reputation sometimes – people assume "portable" means "flimsy." We built this one differently.

Our gantry frame is built with thick-walled steel tubing. It's welded while held in special fixtures to keep it perfectly square as the welds set. Following welding, the entire frame undergoes a thermal stress-relief process. While this step might seem easy to skip to save money, doing so causes the frame to slowly warp over time as its internal stresses naturally ease. We've observed machines from other companies lose their calibration within six months of use on a job site precisely because they skipped this crucial step. Our frames, however, maintain their geometric accuracy.

Once stress-relieved, we machine the rail mounting surfaces flat and parallel. The guide rails themselves are hardened steel, featuring ground bearing surfaces – the same quality you'd expect on a fixed industrial machine. We don't cut corners on the rails just because the unit is portable. This is how we ensure consistent cut accuracy, even after a year of use.

With a 20,000-hour rating, the air-cooled laser source bypasses the maintenance headaches of water-cooled setups. There's no coolant to change, no pumps to replace, and no antifreeze to add. Just keep the intake filters tidy, and it's good to go.

Mild steel – The machine cuts cleanly up to 10mm. We've found that different steel suppliers produce material that cuts slightly differently even at the same nominal thickness, so we always recommend a test cut on a new batch. The edge quality is consistent with proper speed and focal height settings.

Stainless steel – Up to 8mm, the cut edge is actually cleaner than mild steel because stainless doesn't form slag the same way. The heat-affected zone is narrow, which matters if your parts go into welding or finishing without edge prep..

Aluminum – This is where you need to pay attention. Aluminum reflects enough of the beam that you're effectively cutting with less power. Use a shorter focal length and bump up the frequency. The edge won't be as pristine as steel, but for structural work and fabrication, it's entirely acceptable.

Galvanized material – The zinc coating vaporizes and creates a plume that scatters the beam. You can cut it, but the nozzle and lens wear faster. We recommend keeping spare consumables on hand if you run a lot of galvanized. Good extraction helps but doesn't eliminate the wear.

Product Features

Welded steel frame with stress relief – The frame holds its geometry through repeated moves and setups. We've seen machines from 2016 still maintaining their original calibration in daily shop use.

High cutting precision – ±0.1mm positioning accuracy. In practice, most users see tighter results on properly calibrated units. This means parts fit the first time.

Low maintenance cost – Air-cooled source eliminates all coolant-related maintenance. No pump replacements, no fluid changes, no freeze protection.

Energy-efficient operation – The 1200W source draws less power than comparable systems. For regular use, the power savings are noticeable on the utility bill.

Servo drive system – Servo motors maintain position under varying loads. Stepper motors can lose steps; servos don't.

Quick setup – Two people, half a day, standard tools. No electrical modifications needed for 220V power.

Compact footprint – The machine stores in roughly the same floor space as a workbench.

Hebei Juliang Technology Co., Ltd. was established in 2018 and is located in Gaocheng District, Shijiazhuang. It is a national high-tech enterprise. The company focuses on the research, development, production and sales of intelligent laser cutting and welding equipment. Its core products include CNC cutting machines and laser welding machines, which are widely used in the fields of metal processing and mechanical manufacturing. With 16 patent technologies and independent R&D capabilities, Juliang Technology is committed to providing customers with one-stop intelligent manufacturing solutions. Through technological innovation, it empowers industrial upgrading and promotes the development of China's manufacturing industry.

What kind of jobs is this portable CNC cutter best for?
Field repairs, on-site structural modifications, small fabrication shops with limited floor space, and any application where moving the steel to a fixed cutting table is impractical. It handles up to 10mm mild steel and 8mm stainless.

How does laser cutting compare to plasma for portable use?
Laser gives you cleaner edges with less dross and a narrower kerf than plasma. CNC control also gives you better accuracy on corners and curves. Plasma can cut thicker material at lower equipment cost. For steel up to 10mm with a CNC system, laser is the more precise choice.

What power supply do I need for this machine?
Standard 220V AC single-phase, 50/60Hz, on a dedicated 15-amp circuit. The control box includes power conditioning. No three-phase or special electrical work required.

How long does delivery take, and what support is provided?
Typical delivery is 15-30 days depending on destination. We offer remote video support for installation and troubleshooting. Our service philosophy is that support starts at purchase, not at failure – we want to answer setup questions before they become problems.

What's covered under the warranty?
The complete machine has a 1-year warranty covering manufacturing defects. The laser source is covered for 2 years. Consumable items – nozzles, lenses, ceramic rings – are covered only for initial supply. We stock spare parts and can ship replacements quickly to minimize downtime.

Can this portable cutter be customized for specific workshop layouts or power configurations?

Yes, we offer several customization options. The control box can be mounted remotely to fit tight spaces, and the rail system can be extended or shortened based on your available floor area. For power configurations, the standard unit runs on 220V single-phase, but we can adjust the power supply components for regions with different voltage standards. We've done this for customers in Southeast Asia and parts of Africa where utility power varies. Discuss your specific requirements with our engineering team before ordering.

What's the typical lead time from order confirmation to delivery?

Standard lead time is 15 to 30 working days from order confirmation, depending on your location and any customizations requested. This includes production time (our factory runs a continuous production schedule) and transit time. We maintain a buffer stock of popular configurations, so if your order matches a standard build, we can often ship sooner. Contact us for current lead times-they fluctuate with order volume and shipping route availability.

Is there a minimum order quantity, or can I purchase a single unit for trial?

We sell single units for trial purposes. There's no minimum order quantity. We've found that many first-time buyers want to run the machine in their own shop before committing to multiple units. That's fine with us. We also offer sample cutting services-you can send us your material and we'll cut samples and send them back for your evaluation. This way you see what the machine can do before you buy.

How is the machine protected during international shipping, and what documentation is provided?

Each unit is packed in a heavy-duty wooden crate with internal bracing and desiccant packs to prevent moisture damage during sea freight. The crate is designed for forklift handling and stackable storage. We provide all export documentation-commercial invoice, packing list, bill of lading, and certificate of origin. For CE-marked regions, we include the CE declaration. Customs clearance issues are rare, but if they arise, we assist with the documentation review.

What's the process for commissioning if I don't have technical staff available?

We provide detailed step-by-step video instructions and written manuals that assume no prior laser cutting experience. Most customers complete setup without needing external support. If you don't have technical staff, we can arrange a video call where one of our engineers guides your team through the calibration process step by step. We've done this with customers who were setting up their first CNC machine-it usually takes one focused session and they're cutting production parts the same day. On-site commissioning is available for an additional fee, but we recommend trying the video support first; it's included and works well for most setups.