Hebei Juliang Technology Co., Ltd. is one of the leading manufacturers and suppliers of cnc gantry plasma cutter in China. Please feel free to buy CE approved machinery made in China here from our factory. All customized machines are with high quality and competitive price.
product presentation
A CNC gantry plasma cutter is a large-scale computer-controlled thermal cutting system designed for high-volume industrial metal fabrication.The machine features a rigid overhead bridge structure-the gantry-that moves across a cutting table, carrying one or more plasma torches along programmed paths.The gantry typically spans 3 to 4 meters or more in width, with the cutting length set according to the rails installed, which can extend from several meters up to 20 meters or beyond.
Unlike smaller table-type or portable plasma cutters, a gantry plasma cutter is built for production environments where you're processing full plates-not just small sheets.You load a large steel plate onto the cutting table, the CNC controller follows a programmed path, and the gantry moves the torch across the plate with high precision and repeatability.The result is consistent, accurate cuts on everything from thin gauge sheet up to thick structural plate.
A CNC gantry plasma cutter can handle any conductive metal. This includes
Carbon steel:Typically cut up to 50mm with a 200A plasma system, and 75mm or more with higher amperage. For thicker carbon steel (5mm to 200mm), oxy-fuel torches on the same gantry can be used.
Stainless steel: Cuts cleanly using nitrogen or argon-hydrogen mixtures, though the thickness capability is slightly less than mild steel.
Aluminum: Also cut with nitrogen, but requires higher gas flow rates due to aluminum's rapid heat conductivity.
Other metals: Copper, brass, and other conductive metals can be cut with appropriate gas and settings.
The machine is capable of cutting plate and sheet metal, and can be fitted with bevel cutting features for weld preparation.
Installation and Setup
Gantry machines are sizable and necessitate careful setup.
Foundation: A level concrete floor with adequate load-bearing capacity is essential. This foundation should be ready before the machine is delivered. Always adhere to the foundation drawings provided by the manufacturer, as uneven floors can lead to alignment problems, impacting cutting precision.
Power: A 200A plasma system usually needs 380V three-phase power and draws between 60–80 amps; larger systems consume more. Verify your electrical service capacity in advance.
Gas Supply: Plasma cutting requires compressed air. If your machine has oxy-fuel capabilities, you'll also need oxygen and fuel gas. Ensuring all gases are clean and dry is crucial; moisture in the lines can damage consumables and reduce cut quality. A refrigerated air dryer is a good idea.
Assembly: Gantry machines are delivered in parts and assembled on-site. This process involves putting together and aligning the rails, gantry, and table, and typically takes 3–5 business days.
Total Time: Expect about 5–7 business days from delivery to the machine being ready for its first cut, accounting for complete installation and commissioning.
Our Certificate
Frequently Asked Questions
1.What's the difference between a CNC gantry plasma cutter and a table-type plasma cutter?
A gantry machine has a large overhead bridge that moves across rails, with cutting length determined by rail length. It's designed for full-size plates and industrial production.A table-type machine has a fixed cutting area and is better suited for small to medium plates.Gantry systems can carry multiple torches and handle thicker materials.
2.Can the same machine cut both plasma and oxy-fuel?
Yes. Many gantry systems can be equipped with both plasma and oxy-fuel torches on the same gantry.Plasma cuts faster on medium thickness; oxy-fuel handles thicker carbon steel-up to 200mm.You switch between processes based on the material and thickness.
3. What kind of maintenance does a gantry plasma cutter require?
Daily: inspect consumables (electrode, nozzle, shield cap), check gas pressure, clean slag.
Weekly: clean torch body, inspect gas connections, lubricate rails.
Monthly: replace consumables showing wear, check drive motors, verify positioning accuracy.Regular maintenance is essential for consistent cut quality and machine longevity.
4. What's the typical delivery time for this machine?
Standard configurations ship in 45–60 days. Custom configurations-different cutting widths, multiple torches, specialized gas systems-may take longer. Installation and commissioning add 5–7 business days after delivery.
Hot Tags: cnc gantry plasma cutter, China cnc gantry plasma cutter manufacturers, factory, CNC Gantry Plasma Cutting Machine, CNC Heavy Duty Gantry Plasma Flame Cutting Machine, gantry cnc cutting machine, Gantry CNC Plasma Cutting Machine, High Precision Gantry CNC Plasma Cutting Machine, Industrial Gantry CNC Plasma Cutting Machine
