Hebei Juliang Technology Co., Ltd. is one of the leading manufacturers and suppliers of cnc simple fiber laser tube cutting machine in China. Please feel free to buy CE approved machinery made in China here from our factory. All customized machines are with high quality and competitive price.

The Tube Laser Your Welder Can Learn Before Lunch

No Programmer. No G-Code. Just Two Mornings of Training.
I've watched shops buy expensive tube lasers and then let them sit idle. The control system was too complicated. The operator went back to the cold saw. That's $50,000 of scrap metal disguised as a machine.
So we built something different.
A CNC simple fiber laser tube cutting machine that your existing welder or fabricator can learn in two mornings. No programming degree. No dedicated CNC programmer on payroll.

Why "Simple" Matters in a Dusty Shop

Most laser tube cutters are designed in clean rooms. They have 47 sensors for everything - door open, door closed, material present, material moving, chuck rotated, support extended.

Here's what happens after six months in a real fabrication yard: Dust kills sensors. Vibration loosens connections. Heat melts plastic housings. The machine stops. You wait for a technician.

Our approach on this CNC simple fiber laser tube cutting machine: Fewer sensors. More mechanical certainty.

Component	Typical Machine	This Machine
Chuck clamping	Sensor checks pressure	Pneumatic - constant force, no sensor
Follow-up support	Separate servo with position sensor	Mechanically coupled to chuck - no drift
Tube presence	3+ optical sensors	Mechanical stop + operator visual
Total sensors	~50	~12

The result after twelve months in a customer shop: Zero sensor-related downtime. The only stops were for scheduled nozzle changes and material reloading.

100

Real Shop, Real Result: Indonesia

The customer: General fabrication shop, Indonesia - 8 employees, no CNC programmer
The problem: Cold saw + manual notcher. Complex intersecting cuts took 45 minutes each. Scrap rate from wrong angles was running 12%.
The solution: One CNC simple fiber laser tube cutting machine with manual feeding
After six months:
Intersecting cut time: 45 minutes → 2 minutes
Scrap rate: 12% → under 2%
The welder learned the machine in one afternoon
They stopped outsourcing tube coping entirely
What the owner said: "I don't need a programmer. My welder runs it."

What This Machine Cuts - Clean, No Grinding

Parameter	Value
Round tubes	φ12 – φ220 mm
Square/rectangular	□12 – □150 mm
Profile shapes	Waist-shaped, hexagonal, D-shaped, irregular
Positioning accuracy	±0.03 mm
Repeatability	±0.03 mm
B-axis max speed	120 RPM
Max idle speed (X/Y)	100 / 120 m/min
Manual loading length	up to 6600 mm
Max single tube weight	120 kg

Full-meter accuracy: 0.15 mm deviation over 6 meters. Your long parts stay true.

The Control Interface - What "Simple" Actually Means

The Fangling L5210H system comes pre-loaded with common tube shapes.
Your operator's workflow:
1.Press the icon for "round" or "square"
2.Type the dimensions (diameter, wall thickness, length)
3.Press "calculate" - the machine generates the tool path
Press "start"
Nesting software (Fangling FLCAME) handles part arrangement. Import a DXF. The software recommends the most material-efficient layout.
Most new operators cut their first part within two hours of unpacking.
No G-code. No programming manual. No external consultant.

Three Ways This Machine Reduces Downtime

Downtime Reducer #1: Mechanically Coupled Follow-Up Support
On typical machines, the support has its own servo and position sensor. If they drift out of sync - which happens - the tube bends or the cut goes wrong.
On this machine: The support is mechanically coupled to the chuck. It moves exactly when and where the chuck moves. No sync drift. Ever.
Downtime Reducer #2: Replaceable Wear Plates
If an operator drops a heavy tube and bends a support bracket, you don't replace the entire assembly. The support uses replaceable wear plates. A bent plate ships in 48 hours. Replacement takes 20 minutes with basic hand tools.
Downtime Reducer #3: Clear Alarms, Not Error Codes
When something goes wrong, the screen shows plain English: "Material not clamped" or "Air pressure low." Not "Error 0x47F2 - refer to manual page 142."
Your operator fixes it immediately. No call to tech support for a code translation.

Where Shops Use This Machine

Industry	Application
Steel fabrication	Pipe trusses, handrails - intersecting cuts off the machine ready to weld
Furniture	Chair frames, table legs - hundreds of identical parts with ±0.03 mm repeatability
Automotive repair	Roll cages, exhaust sections - D-shaped and hexagonal profiles run without changing jaws
On-site construction	Cut pipes to length at the job site - simple enough for temporary crews

One customer runs this CNC simple fiber laser tube cutting machine on a concrete floor next to his welding bay. No special foundation. No isolation pad. It just works.

Who Builds It - Hebei Juliang Technology

We entered CNC cutting in 2014. Three factory expansions later, we run a full fabrication facility. We cut our own steel every day.

Certifications you can verify:

High-tech enterprise (national level)

Multiple invention patents and utility model patents

CE certified

We don't outsource production. Every CNC simple fiber laser tube cutting machine is assembled and tested in our own factory. That's why we know exactly which sensors to remove.

Service - Written the Way We Actually Deliver

You contact us by WhatsApp or email.

An engineer responds within hours, not days.

We do a video call to see the problem.

If it's software or alignment: we walk you through the fix.

If a part failed: we ship it within 48 hours.

Warranty: 1 year whole machine, 2 years laser generator. Free repair under warranty. Test, repair, burn-in for 24 hours, ship back.

FAQ

Q: What does "simple" actually mean on this CNC simple fiber laser tube cutting machine?

A: It means icons, not G-code. Select "round" or "square", enter dimensions, and the machine calculates the tool path. No programming degree. Most operators cut their first part within two hours.

Q: Can I use this for both production runs and one-off cuts?

A: Yes. Automatic feeding for batches of 50+. Switch to manual for a single custom length or odd profile. The machine remembers last settings for each mode.

Q: What if the follow-up support gets bent?

A: The support uses replaceable wear plates, not structural steel. Bent plate? We ship a replacement within 48 hours. Repair takes 20 minutes. Video guide included.

Two Ways to Prove It - No Charge

Option one - Email a DXF of your most complicated intersecting cut. We'll run it on a CNC simple fiber laser tube cutting machine and send photos. No cost. No sales call afterward.
Option two - 15-minute live video call. Watch an actual machine cutting round and square tubes on our factory floor. See the control interface. See the cut quality.
[Get a Quick Quote]
Hebei Juliang Technology Co., Ltd.