Hebei Juliang Technology Co., Ltd. is one of the leading manufacturers and suppliers of oversize fiber laser cutter in China. Please feel free to buy CE approved machinery made in China here from our factory. All customized machines are with high quality and competitive price.
When Standard Size Means Compromise
A standard 3-meter laser cutter works well for most sheet metal jobs. But when your plate is 12 meters long, you have two choices: cut in sections and hope the alignment errors don't add up, or get a machine that matches the size of your material.
An oversize fiber laser cutter solves that problem. The working area starts where standard machines stop - 6 meters, 12 meters, 14 meters. Some configurations support widths up to 3.2 meters, with cutting lengths up to 14 meters or longer. The machine cuts the entire plate in one pass. No repositioning. No alignment errors. No rework.
Why Plasma Users Are Switching
Plasma has been the standard for thick plate for decades. It's about to be replaced.
Cutting speed: plasma does 50mm plate at 220-250 mm/min. A 30kW fiber laser does 650 mm/min. Nearly three times faster.
Edge quality: plasma leaves a rough edge that needs grinding. Grinding adds 15-25% to labor time. Laser leaves a clean edge. No grinding.
Material waste: plasma kerf is 3-5mm wide. Laser kerf is 0.3-0.5mm wide. On 500 tons of plate per month, that's 25-40 tons saved annually.
I'm not saying plasma is dead. It still has its place. But on thick plate, the economics are shifting.
The Underrated Feature: Bevel Cutting
Bevel cutting is often overlooked, but it's a real game-changer. Normally, you'd cut a plate flat and then move it to another machine for beveling. This means an extra machine, an extra operator, and an extra setup.
But with bevel cutting, the plate is ready for welding right after it comes off the machine. It cuts the bevel in the same pass. You can achieve K, V, Y, U, and X-type bevels up to 45 degrees.
Consider shipbuilding: roughly 70% of structural parts require beveled edges. Completing this in a single pass can boost efficiency for those parts by 50-80%.
FAQ
Configurations go up to 30 meters or longer, expandable in 4-meter increments. Table widths range from 3 to 5 meters.
Yes. The machine cuts any plate that fits on the bed. Smaller plates are processed the same way as on a standard machine.
The bed is modular. Each section is independent and stress-relieved. Thermal expansion doesn't transfer. The gantry uses bilateral drive to stay square.
Foundation preparation. The machine requires a level floor with adequate load-bearing capacity. A deviation of even a few millimeters translates to cut errors.
In shipbuilding, about 70% of structural parts need beveled edges. Cutting the bevel in the same pass eliminates a separate operation. Efficiency improves by 50-80% on those parts.
Ju Liang products are not only widely used by well-known domestic enter-prises, but also exported to Southeast Asia, Russia, Africa, Europe and the United States and other countries. Its superior performance and competitive price are unanimously favored by many users.
Our address
Building 1, Juluang Industrial Park, Gaocheng District, Shijiazhuang City, Hebei Province, China
Phone Number
+8615631159021
hbjlkj2026@163.com
Hot Tags: oversize fiber laser cutter, China oversize fiber laser cutter manufacturers, factory, best industrial fiber laser, Large Format Fiber Laser Cutting Machine, Large Format Fiber Laser Cutting Machine For Metal Sheets, large format laser cutter machine, large format laser cutting machine, lUltra Large Format Fiber Laser Cutting Machine
