Hebei Juliang Technology Co., Ltd. is one of the leading manufacturers and suppliers of 6025 cnc plasma and flame cutting machine in China. Please feel free to buy CE approved machinery made in China here from our factory. All customized machines are with high quality and competitive price.

Product Overview

The 6025 CNC Plasma and Flame Cutting Machine offers a versatile solution for large-format dual-process cutting, seamlessly integrating both plasma and oxy-fuel capabilities within a single, efficient setup. Its impressive 6000mm x 2500mm cutting area is specifically designed to handle oversized plates that exceed the capacity of standard equipment. This machine is ideal for demanding industrial environments where the flexibility to switch between plasma cutting for stainless steel and aluminum, and flame cutting for thick carbon steel, is crucial-all without repositioning the material or changing equipment. Engineered with a robust gantry, a high-precision dual-side drive system, and smart torch height control, it consistently delivers the dependable performance expected in heavy fabrication operations.

Build Quality and Materials – Engineered for Heavy Industrial Use

Frame and Gantry Construction

The frame of the 6025 CNC Plasma and Flame Cutting Machine is built from heavy-gauge steel tubing with reinforced corner joints. After welding, the entire structure undergoes stress-relieving heat treatment to eliminate internal stresses that could cause distortion over time. This is critical for maintaining accuracy over years of use.

Guide Rails and Drive Components

Our guide rails, made from high-carbon steel, are precisely ground for unwavering straightness over their entire 6000mm travel. This critical component ensures accuracy. We hardness-test them to guarantee they withstand thousands of hours of continuous operation, preventing wear that could impact cut quality.

Cable Management and Shielding

Plasma arcs generate significant electromagnetic interference that can disrupt controller signals if cables aren't properly shielded. We use shielded cables throughout the system, routed through cable carriers that protect them from abrasion and mechanical stress. The flame torch system uses separate gas hoses and control lines that are routed with sufficient isolation from power cables to prevent interference.

application scenarios

Our Certificate

ISO

ISO

Frequently Asked Questions

What's the difference between plasma and flame cutting, and when should I use each?

Plasma cutting uses an electrically charged gas to melt and blow away metal. It's faster on materials up to about 50mm thick and works on any conductive metal, including stainless steel, aluminum, copper, and brass. Flame cutting (oxy-fuel) uses a chemical reaction between oxygen and steel to burn through the material. It's slower but more economical for thick carbon steel from 50mm up to 150mm. Use plasma for speed and versatility; use flame for heavy carbon steel.

How does the dual-torch setup work on the 6025?

The machine has both a plasma torch and a flame torch mounted on the gantry, either side by side or in a shared carriage arrangement. You select the cutting mode in the controller software, and the machine positions the appropriate torch over the cutting path. The flame torch has its own gas control system for oxygen and fuel gas, while the plasma torch connects to your plasma power source and air supply.

What's the maximum thickness the 6025 can cut?

That depends on which mode you're using. In plasma mode with a 300A power source, you can cut up to about 60mm on mild steel. In flame mode, you can cut carbon steel up to 150mm thick. The flame cutting process becomes noticeably slower at the higher thickness ranges, but it's still economical for thick plate work.

Do I need a special foundation to install this 6025 CNC Plasma And Flame Cutting Machine?

Yes, the 6025 is a heavy machine that requires a flat, level reinforced concrete floor to maintain accuracy. We provide installation drawings with foundation requirements and bolt-down locations. Most industrial workshops with standard reinforced floors meet the requirements, but we recommend checking before installation.