Hebei Juliang Technology Co., Ltd. is one of the leading manufacturers and suppliers of side mount laser tube cutting machine in China. Please feel free to buy CE approved machinery made in China here from our factory. All customized machines are with high quality and competitive price.

Brief introduction of Product

Most tube lasers are built the same way: the tube sits on top of the bed, supported from underneath. You load from one end, the machine cuts, you unload from the other. It works. But it takes up floor space, and the operator walks around the machine to access different sides.

A side mount laser tube cutting machine flips that layout. The tube sits on the side of the bed-closer to the operator, easier to load, easier to unload. The chuck is mounted at the side, and the cutting head works from the side rather than from above. This isn't a minor design change. It changes how you work.

The One-Side Workflow

On a standard tube laser, the operator's day looks like this: load a tube from the front, walk to the control panel, walk to the back to unload, walk back to the front to load the next one. Every cycle involves walking around the machine.

On a side mount machine, the operator stays in one place. Load from the front, reach over to the control panel, unload from the front. No walking around. The machine is against the wall. The operator doesn't need to go behind it.

One shop owner in Hebei timed his operators. On a standard machine, each cycle took about 3 minutes-1 minute of cutting and 2 minutes of walking, loading, and unloading. On a side mount machine, each cycle took about 2 minutes. Over a 200-tube shift, that saved about 3 hours of operator time.

The physical strain is also different. The operator isn't walking back and forth all day. They're standing in one place, loading and unloading from the same side. The chucks are at waist height, not at head height or floor level.

Installation

Installing a Side Mount Laser Tube Cutting Machine is more straightforward than a standard one.

Its narrower profile allows it to fit through regular doorways without needing special rigging or partial disassembly to get it into your workshop.

Since the machine is placed against a wall, you won't need clearance on both sides, saving approximately 1 meter of floor width – a significant advantage in space-constrained shops.

The foundation requirements are identical to a standard machine: a level, reinforced concrete floor capable of supporting its weight. While the machine's total weight is comparable to a standard tube laser, the weight distribution differs, with more load on the side rails due to the side mount design.

Power and gas connections are also the same. It runs on 380V three-phase power, and the gas supply needs to be clean and dry (oxygen for steel, nitrogen for stainless).

From delivery to the first production cut, expect about 3 to 5 working days. This includes on-site assembly, bed leveling, electrical and gas hookups, and parameter tuning based on your shop's material types.

Our Certificate

FAQ

01.What's the main advantage of a side mount tube laser?

Single-side operation. The operator loads, controls, and unloads from the same position. The machine goes against a wall. Floor space is saved. The operator doesn't walk around the machine all day.

02.How much floor space does a Side Mount Laser Tube Cutting Machine save?

About 1 meter in width compared to a standard machine. The machine doesn't need clearance on both sides. You can put it against a wall.

03.Is loading easier on a side mount machine?

Yes. The tube feeds from the side. The operator loads from the front. The chucks are at waist height. You don't need to reach over the machine or walk around to the back.

04.Does the side mount design affect cut quality?

No. The lower center of gravity actually reduces vibration on long tubes, which can improve cut quality on thin-walled tubes.