Fiber Tube Laser Cutting Machine

What a Fiber Tube Laser Actually Does A fiber tube laser cutting machine is a CNC system that cuts round pipes, square tubes, rectangular profiles, and structural shapes like angle steel and channel steel using a fiber laser beam. The machine rotates the tube while the cutting head moves along...

Send Inquiry

Hebei Juliang Technology Co., Ltd. is one of the leading manufacturers and suppliers of fiber tube laser cutting machine in China. Please feel free to buy CE approved machinery made in China here from our factory. All customized machines are with high quality and competitive price.

What a Fiber Tube Laser Actually Does

A fiber tube laser cutter is a computer-controlled machine that uses a laser to cut various profiles like round tubes, square and rectangular sections, and structural shapes such as angle and channel steel. It works by rotating the tube while the cutting head moves along its length, allowing for a complete part to be produced from a single setup and program. This machine can cut holes, notches, miters, and contours all in one go.

Unlike a cold saw, the main advantage isn't just speed; it's the removal of extra steps. With a cold saw, you'd cut the tube to length, then drill holes, and finally deburr. The fiber tube laser handles all these operations in a single pass.

Where This Fiber Tube Laser Cutting Machine Goes

Furniture manufacturing - Chair frames, table legs, shelving systems.

Automotive parts - Exhaust systems, roll cages, chassis components.

Fitness equipment - Gym frames, weight racks, cardio machine structures.

Construction and steel structures - Handrails, scaffolding, structural supports.

Agricultural machinery - Sprayer booms, planter frames, grain handling equipment.

Heavy equipment and energy - Structural steel, off-highway and agricultural equipment, transportation, shipbuilding, and power generation.

What typically breaks or wears out

Protective lenses: Located at the bottom of the cutting head, these lenses shield the optics from spatter. They require cleaning when dirty and replacement if scratched.

Nozzles: The nozzle guides the assist gas. Replace it if it becomes damaged.
Chuck jaws: Metal dust can build up on the jaws, decreasing their grip. Clean them weekly and replace them when they show wear.
Guide rails and racks:Dust and cutting debris tend to collect on the rails. Clean them daily and lubricate them weekly.

The most frequent problem is assist gas quality. If the gas is wet or contaminated, it can harm the optics and negatively impact cut quality. A refrigerated air dryer is essential.

Our Certificate

UMP

UMP

FAQ

01.How long does it take to switch tube sizes?

With full-stroke chucks, no jaw changes are needed for different pipe specifications, reducing process steps and improving efficiency. Manual adjustment takes 5-10 minutes depending on the size change.

02.How much room does it need?

A standard tube laser cutter designed for 6,500mm tubes generally takes up about 10 to 12 meters in length and 3 to 4 meters in width, varying based on how the loading and unloading equipment is set up.

03.Do I need to be a CNC expert to run one of these?

No. The control system uses a graphic interface – pick the material, enter the thickness, load your DXF file, press start. Most operators are comfortable within a week. The built-in nesting software requires no additional purchase.

04.What upkeep is involved?

Daily tasks include inspecting the protective lens and nozzle, cleaning the lens with specialized paper and alcohol. Weekly checks cover coolant levels and air filters. Monthly inspections involve looking at guide rails and drive mechanisms. The maintenance is simpler than with CO₂ lasers, as there are no mirrors to adjust or laser gas to replenish.